如何检查，重置，新增自定义空间zone！！！
In this guide I will explain step by step how you can check, remove and create your zone. Happy reading http://acis.i-live.eu/Smileys/l2/delf2_7.gif Chapter I - Checking the type of zone (aCis case)The easiest way to find out the type of zone is to use admin command //zone_check, accessible also from admin panel, //admin -> server -> zone check.
The output
http://oi44.tinypic.com/adjdqr.jpg Chapter II - Removing the type of zone
Now, when you know the type(s) of the zone (look above) and you want to remove it, go to the corresponding file (all zones are stored inside /data/xml/zones/). For instance, if you want to remove the peace zone, let's say from Primeval Island, you open the PeaceZone.xml and you search for the record. They are mostly commented <!-- xxx -->, so it's not gonna be hard as you think. <zone type="PeaceZone" shape="NPoly" minZ="-4792" maxZ="208"><!-- primeval_peace2 --> <node X="4850" Y="-4736" /> <node X="7294" Y="-4712" /> <node X="8529" Y="-820" /> <node X="3615" Y="-737" /> </zone>Simply remove that part of the code, save and voila. The beach is no longer a peaceful zone. Slap some asses http://acis.i-live.eu/Smileys/l2/alone.gif Chapter III - Types of zones
First of all, in order to create new zone, you must know possible shapes. From l2jwikiCuboid Zones:-------------Require 2 nodes (vertices), in order to make a Square, for example:O . . . .. .. .. .. . . . OO = Node (vertice)NPoly Zones:------------Require 3 or more nodes (vertices), in order to make a Polygon or another geometrical model, for example: O / \/ \ / \O - - - OO = Node (vertice)Cylinder Zones:---------------Require 1 node (vertice) and radius, in order to make a Cylinder. *** * * * ** * * ** ** ** O ** ** * * ** * * * * * ***O = Node (vertice)* = Radius Chapter IV - Creating the new zone
[*]Cuboid
Cuboid requires only 2 nodes as it's said on the image above. You must get only 2 nodes/vertices (by typing /loc ingame) and another two will be generated automatically. How? It's simple, when the two lines cross each other, the node is generated. http://oi57.tinypic.com/4uuir4.jpg
Good example of the cuboid shape are Arenas. You get two opposite corners and done. <zone type="ArenaZone" shape="Cuboid" minZ="-3596" maxZ="0"><!-- dion_monster_pvp --> <node X="11947" Y="183019" /> <node X="12943" Y="184010" /> <spawn X="12312" Y="182752" Z="-3558" /> </zone>
[*]NPoly
With help of NPoly, you can create any shape you imagine, there are no restrictions, but ofc.. You must create it with your "head", no crossing lines and similar crap http://acis.i-live.eu/Smileys/l2/ork2_16.gif
http://oi60.tinypic.com/ok3pqd.jpg
Most of the zones uses NPoly, here is an example <zone type="JailZone" shape="NPoly" minZ="-2992" maxZ="-2792"> <!-- gm_prison --> <node X="-116390" Y="-251581" /> <node X="-112756" Y="-251617" /> <node X="-112720" Y="-248199" /> <node X="-116354" Y="-248217" /> </zone>
[*]Cylinder
Cylinder requires only one, central point. You declare it's radius with rad="XX". Take the middle point, and simply rush forward, stop in place you want and compare the Y value, that would be your radius. - Image. http://oi57.tinypic.com/20iixt.jpg <zone type="ArenaZone" shape="Cylinder" minZ="-2320" maxZ="-2120" rad="700"> <!-- hot springs circle --> <node X="151555" Y="-127082" /> </zone> When you decided which shape to use and you have the coords, don't forget the set/change it's type (in case you simply c/p another zone structure). If your new custom zone is called FlagZone, then you must declate it under type=" "<zone type="FlagZone"Basically, you can put the zone code to any file you wish, but the best way to keep things organized it to create a new file, in that case, FlagZone.xml - you can copy any existing file, rename it, remove all <zone> records and paste there yours. That way you know where to search if you want to add more zones or remove, extend or whatever. These are the available shapes. X and Y is obvious, now you wonder what should be the Z value. Well, basically Z value depends of the territory shape, if it's plat or bumpy, are there mountains or not. If it's plat, more or less, you should be fine with +-100 from the basic value generated from /loc. You can add bigger to be 100% sure that when someone ride the strider, fly with wyvern,will not leave your zone.
When you are done with creating the zone, now it's time to see if it's working. Launch the server, go to the new zone and type //zone_check, else go to admin panel -> server -> zone check (chapter 1 screen). In case it's your custom zone, you can press Visualize All to see the shape. The result will be dropped adena on the ground, as you could notice on the screenshot above.
Basically, that's it. If I forgot about any case, let me know, so I will update the guide.
Your, SweeTy http://acis.i-live.eu/Smileys/l2/dw1_4.gif
外国大牛写的教程，看的懂的上，看不懂的，感兴趣的自行使用在线翻译，懵懂的看！！！！！
附上原文地址：http://www.maxcheaters.com/topic/188679-how-to-check-remove-and-add-zone/
翻译翻译看看 感謝大大的分享 非常感謝 路过顶一下！~ 感谢楼主分享 完全看不懂 风好大 发表于 2023-5-19 18:49
完全看不懂
你想做什么？ 比如说你想自己建一个什么样的zone??? l2fater 发表于 2023-5-20 10:12
你想做什么？ 比如说你想自己建一个什么样的zone???
比如说副本 风好大 发表于 2023-6-12 19:28
比如说副本
副本 一般在zones文件夹内有instance这样的文件代表副本的区域，可以参考复制一份然后，修改对应的XYZ轴区域，当然，有的服务端可以直接在游戏里面的GMadmin 菜单里面进行添加instance!!! 这个是技术的 要慢慢学习才可以
页:
[1]
2